carbon steel
Brief Introduction Of Metal Salt Mist Test
Most of the corrosion of metallic materials occurs in the atmospheric environment, which contains corrosive components such as oxygen, humidity, temperature changes and contaminants, as well as corrosion factors.
Salt mist corrosion is a common and most destructive atmospheric corrosion. Salt fog on the corrosion of metal materials, mainly conductive salt solution infiltration into the metal inside the electrochemical reaction, the formation of a "low-potential metal-electrolyte solution a high-potential impurity" micro-battery system, the occurrence of electronic transfer, as the anode of the metal dissolved, the formation of a new compound that is corrosive.
Chlorine ions plays a major role in Salt mist corrosion Failure process, it has a strong penetration ability, easy to penetrate the metal oxide layer into the metal inside, damage the blunt state of the metal, at the same time, chloride ions have a small hydration energy, easy to be adsorbed on the metal surface, instead of protecting the metal oxide layer of oxygen, so that the metal is damaged. Salt mist test is an accelerated corrosion resistance assessment method for artificial atmosphere. It is to water a certain concentration of salt water mist; then sprayed in a closed thermostat, by observing the changes in the sample placed in the box after a period of time to reflect the corrosion resistance of the measured sample, it is an accelerated test method, its salt mist environment chloride salt concentration, but the general natural environment Salt mist content of several or dozens of times times,
The corrosion rate is greatly increased, the salt mist test of the product is carried out, and the time of the result is greatly shortened.
When testing a product sample in a natural environment, the corrosion time may take one or even several years, and similar results can be obtained in a few days or even hours under the artificial simulation of salt mist environmental conditions.
0users like this.